Armourfast 1:72 Sd.Kfz. 251/1 Part 4

I continued the work on my Armourfast 251's. I wanted to paint them in a generic 3 color camouflage with hard edges. For that I started to mask with tape, but the tape I use was/is not good for this. I made a visit to a local hobby store and bought some masking liquid, the shop owner told me that thau would work.

I painted the whole model in Aquacolor sand (#36116) after that I made spots with the masking liquid to the place that I wanted to keep sand colored.

After that the models got a layer of Revell Aquacolor fern green (#36360). Then I applied the next layer of masking liqid to mark the areas that I wanted to keep green.

The next layer of color was Aquacolor mud brown (#36180), I used it even when it is glossy, I learned some day ago that it won't shine anymore after the last layer of sealing matte paint.

After all the color was dry all I had to do was to remove the masking liquid to see if it worked as I planned. Watch the picture, it worked fine. It was tricky to remove all of the masking liquid (very sticky stuff), but when I was almost finished with it, I found out, that an old toothbrush was a good tool to remove the stuff.
I think this technique will work with normal brushes too, you do not have to own airbrush to use it. And the rmoval of the masking liquid (after it and the colors dried) could be easier if only one thin coat of it is used, as you can see on the first picture I took someting more then was needed.
But it worked :D
 

On the right 251 I took the antenna apart, it will be fitted later. The funker workplace was improvised without any sources and was scratchbuilt. 
I'm not sure what to do with the two 251s, but I tought about a new idea to apply wash. If I use now a good shiny clear color to seal it, a wash would only flow in the hollow (?) spots of the kit. I will use this method on an old toytank for a first try, if it works, that is something I will try before. You will read it here in this blog, but before that I have to finish some older projects.

The two Armourfast 251 will go now into the "actual projects" box, they will be finished someday because I found some days ago some pictures of an other model of which I own a kit, and these were a great inspiration for me so, but more infos soon, the topic will be Panzer46.

And then I will take some time on my 28mm undead army, I hope tomorrow my new Mantic zombies will arrive,it's time to kick some dwarfs' asses.

Armourfast 1:72 Sd.Kfz. 251/1 Part 3

I finished the construction of my Sd.Kfz. 251s. The fenders are a little too low, the wheels fit very closely, luckily I lost one of the wheels therefore I use the wheels of the ESCI 251 which are a bit smaller.

On the following picture is a comparison of the Armourfast, Revell and ESCI frontwheels.

One of them got the pioneer bridge of the ESCI 251 kit, and when I'm at it I will loot another ESCI 251 kit so the other 251 will get a frame antenna. I hope I can attach it without too big spots of glue.

Some tools and other stuff will follow, I have to search my spareparts box for pieces to attach.

Both Armourfast Sd.Kfz. 251 got their base color, is this case I use Revell Aquacolor sand (#36116). I will try to paint them in 3 color hard edged camo pattern, eventually I will do this tonight at least I will try to mask them tonight. Then I have to find some decals for them.

Additional informations about this kit can be found in some older posts (here and here).

Italeri 1:72 SdKfz. 234/4

Pictures of my finished SdKfz. 234/4. The figure came with an Italeri kit and doesn't have legs because it was commander of another tank before wher he did not fit with legs.

This kit was build some months ago, I remember that all parts fitted very well. The construction went without problems, but on the next kit I will not glue the wheels before I paint it, this will make it easier to paint.


And I learned something new. I accidently bought glossy mud brown that I used for the camo pattern, but I recognized it after I applied it. That's why the brown in the previous post so shiny, I thought for alsmost 3 hours that the color was still wet.

But after the last layer of matte paint the brown spots weren't shiny anymore. Great, I didn't knew that before, I tought I had to repaint all brown with matte paint.

Italeri 1:72 SdKfz. 234/4 (Work In Progress)

Some pictures of an actual project, this is Italeri's SdKfz. 234/4. This is the first kit that I painted with a "real" airbrush gun, the colors are still a little wet. The used colors were Revell Aquacolor Sand (#36116), farn green (#36360) and mud brown(#36180),  all colors were thinned with alcohol.

The camo pattern is not too bad for a first try and there are some spots where I will use a brush to finish the paintjob.

The picture below shows my new airbrush gun and compressor, I bought the Revell Airbrush starter set (#39199) and I think it is worth its price.

Next week I will publish my videoreview of this stuff, the scenes are already filmed but the sound is too bad, that's why I have to re-record it.

The Figures Of The World Of Warcraft Boardgame 2/2

Here is the rest of the WoW boardgame figures. In this post you can find the first part of the figures from this game.